Unitronic Carbon Fiber Intake System with Air Duct - Various Audi / Volkswagen 1.8/2.0 TSI Gen3 MQB Models
With extensive background in engineering the finest in Performance Software Unitronic developed an intake system that maximizes performance of vehicles equipped with the 1.8/2.0 TSI Gen3 (MQB) engines.
This translates into a complete Cold Air Intake System that is sure to perform to the maximum providing increased power air velocity and throttle response while also decreasing air intake temperatures and turbo lag. Unitronic's Carbon Fiber Air Duct also helps to increase power and air flow by taking advantage of both air inlets available in the OEM grill.
In addition Unitronic's Cold Air Intake will enhance the sound of your turbocharger and diverter valve.
Note: Does not fit vehicles with MAF Sensor
Features / Benefits
-
Optimized Design for Maximum Performance:
Unitronic specifically developed its air intake system to provide increased power, air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag. -
Quality Silicone Components:
Heavy duty, heat resistant and durable 4-ply silicone hose will not crack or tear overtime. -
Stainless Steel Hardware:
Rust resistant hardware that will outlast your vehicle. -
2/2 Twill Prepreg Carbon Fiber Weave:
High quality material to give you a lightweight, durable and resistant airbox. -
Autoclave Construction:
The curing process is completed in an autoclave to eliminate resin voids thus ensuring a strong component. A UV and heat resistant clear coat is then added on top of the carbon fiber to protect it against discoloration and give it a nice, smoot surface finish. -
Proprietary 3-inch Filter:
Unitronic’s proprietary 3" dry cotton filter is engineered to maximize air flow with its radius base while keeping dust and foreign debris away from your engine. -
Oversized Airbox Air Inlet for Increased Airflow:
Airflow capacity is increased when combined with Unitronic’s Carbon Fiber Air Duct. -
Smooth Flow Transition:
Ferrule provision on air filter base to ensure a smooth and linear airflow transition between elements. -
Direct Bolt-On Fitment with OEM Mounting Locations:
Utilizes all OEM mounting locations through use of Unitronic’s proprietary EPDM rubber mounting grommets. -
Enhanced Turbocharger Sound:
Unitronic’s Cold Air Intake Systems feature an open element design which results in a more audible sound from your vehicle’s turbocharger and Diverter Valve (DV). -
Dual Air Inlet:
Take advantage of both air inlets available in the OEM grille and benefit from an increased air flow. -
Airbox Water Drainage Provision:
Open slots located at the bottom of airbox allow for the drainage of water.
Hardware Included
- Carbon Fiber Box
- Carbon Fiber Air Duct
- 3-inch Powdercoated Aluminum Inner Intake Tube
- Multi-ply Turbo Inlet Tube
- Proprietary 3-inch Dry-Filter (Cotton)
- Hardware Kit
Recommended Software
- Stage 1
- Stage 1+
- Stage 2 (If equipped with Unitronic's 3'' Downpipe)
Related Hardware
- Carbon Fiber Intake For MK7 GTI | MK7 R | 8V A3 | 8V S3 | MK3 TT
- Unitronic Carbon Fiber Air Duct for MK7/8 & 8V/8Y
Install
The Unitronic Carbon Fiber Cold Air Intake System for vehicles equipped with the 1.8/2.0 TSI Gen3 (MQB) is designed to be simple to install with all the hardware necessary included. Installation time will take approximately one hour including the removal of the factory intake and installation of your new intake system.
A difficulty rating of 1 means that minimal tools and experience are required and those with a basic understanding of the vehicle should have no problem completing the installation.
Unitronic products are designed to meet all manufacturer tolerances and specification with regard to installation ease and tolerances. All of our products are developed to the highest standard of fitment and finish to ensure that it lasts the life of your vehicle.
A difficulty rating of 1 means that minimal tools and experience are required and those with a basic understanding of the vehicle should have no problem completing the installation.
Unitronic products are designed to meet all manufacturer tolerances and specification with regard to installation ease and tolerances. All of our products are developed to the highest standard of fitment and finish to ensure that it lasts the life of your vehicle.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Unitronic Carbon Fiber Intake System with Air Duct - Various Audi / Volkswagen 1.8/2.0 TSI Gen3 MQB Models
Unitronic Carbon Fiber Intake System with Air Duct - Various Audi / Volkswagen 1.8/2.0 TSI Gen3 MQB Models
With extensive background in engineering the finest in Performance Software Unitronic developed an intake system that maximizes performance of vehicles equipped with the 1.8/2.0 TSI Gen3 (MQB) engines.
This translates into a complete Cold Air Intake System that is sure to perform to the maximum providing increased power air velocity and throttle response while also decreasing air intake temperatures and turbo lag. Unitronic's Carbon Fiber Air Duct also helps to increase power and air flow by taking advantage of both air inlets available in the OEM grill.
In addition Unitronic's Cold Air Intake will enhance the sound of your turbocharger and diverter valve.
Note: Does not fit vehicles with MAF Sensor
Features / Benefits
-
Optimized Design for Maximum Performance:
Unitronic specifically developed its air intake system to provide increased power, air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag. -
Quality Silicone Components:
Heavy duty, heat resistant and durable 4-ply silicone hose will not crack or tear overtime. -
Stainless Steel Hardware:
Rust resistant hardware that will outlast your vehicle. -
2/2 Twill Prepreg Carbon Fiber Weave:
High quality material to give you a lightweight, durable and resistant airbox. -
Autoclave Construction:
The curing process is completed in an autoclave to eliminate resin voids thus ensuring a strong component. A UV and heat resistant clear coat is then added on top of the carbon fiber to protect it against discoloration and give it a nice, smoot surface finish. -
Proprietary 3-inch Filter:
Unitronic’s proprietary 3" dry cotton filter is engineered to maximize air flow with its radius base while keeping dust and foreign debris away from your engine. -
Oversized Airbox Air Inlet for Increased Airflow:
Airflow capacity is increased when combined with Unitronic’s Carbon Fiber Air Duct. -
Smooth Flow Transition:
Ferrule provision on air filter base to ensure a smooth and linear airflow transition between elements. -
Direct Bolt-On Fitment with OEM Mounting Locations:
Utilizes all OEM mounting locations through use of Unitronic’s proprietary EPDM rubber mounting grommets. -
Enhanced Turbocharger Sound:
Unitronic’s Cold Air Intake Systems feature an open element design which results in a more audible sound from your vehicle’s turbocharger and Diverter Valve (DV). -
Dual Air Inlet:
Take advantage of both air inlets available in the OEM grille and benefit from an increased air flow. -
Airbox Water Drainage Provision:
Open slots located at the bottom of airbox allow for the drainage of water.
Hardware Included
- Carbon Fiber Box
- Carbon Fiber Air Duct
- 3-inch Powdercoated Aluminum Inner Intake Tube
- Multi-ply Turbo Inlet Tube
- Proprietary 3-inch Dry-Filter (Cotton)
- Hardware Kit
Recommended Software
- Stage 1
- Stage 1+
- Stage 2 (If equipped with Unitronic's 3'' Downpipe)
Related Hardware
- Carbon Fiber Intake For MK7 GTI | MK7 R | 8V A3 | 8V S3 | MK3 TT
- Unitronic Carbon Fiber Air Duct for MK7/8 & 8V/8Y
Install
The Unitronic Carbon Fiber Cold Air Intake System for vehicles equipped with the 1.8/2.0 TSI Gen3 (MQB) is designed to be simple to install with all the hardware necessary included. Installation time will take approximately one hour including the removal of the factory intake and installation of your new intake system.
A difficulty rating of 1 means that minimal tools and experience are required and those with a basic understanding of the vehicle should have no problem completing the installation.
Unitronic products are designed to meet all manufacturer tolerances and specification with regard to installation ease and tolerances. All of our products are developed to the highest standard of fitment and finish to ensure that it lasts the life of your vehicle.
A difficulty rating of 1 means that minimal tools and experience are required and those with a basic understanding of the vehicle should have no problem completing the installation.
Unitronic products are designed to meet all manufacturer tolerances and specification with regard to installation ease and tolerances. All of our products are developed to the highest standard of fitment and finish to ensure that it lasts the life of your vehicle.
Select Add MQB Air Pump Breather Filter Element?
Select Add Unitronic Coolant Reroute Hose For EA888 EVO4 & Gen3 MQB?
Select Add Unitronic Turbo Inlet Elbow For 1.8/2.0 TSI Gen3 MQB?
From $380.10
Original: $1,085.99
-65%Unitronic Carbon Fiber Intake System with Air Duct - Various Audi / Volkswagen 1.8/2.0 TSI Gen3 MQB Models—
$1,085.99
$380.10Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
With extensive background in engineering the finest in Performance Software Unitronic developed an intake system that maximizes performance of vehicles equipped with the 1.8/2.0 TSI Gen3 (MQB) engines.
This translates into a complete Cold Air Intake System that is sure to perform to the maximum providing increased power air velocity and throttle response while also decreasing air intake temperatures and turbo lag. Unitronic's Carbon Fiber Air Duct also helps to increase power and air flow by taking advantage of both air inlets available in the OEM grill.
In addition Unitronic's Cold Air Intake will enhance the sound of your turbocharger and diverter valve.
Note: Does not fit vehicles with MAF Sensor
Features / Benefits
-
Optimized Design for Maximum Performance:
Unitronic specifically developed its air intake system to provide increased power, air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag. -
Quality Silicone Components:
Heavy duty, heat resistant and durable 4-ply silicone hose will not crack or tear overtime. -
Stainless Steel Hardware:
Rust resistant hardware that will outlast your vehicle. -
2/2 Twill Prepreg Carbon Fiber Weave:
High quality material to give you a lightweight, durable and resistant airbox. -
Autoclave Construction:
The curing process is completed in an autoclave to eliminate resin voids thus ensuring a strong component. A UV and heat resistant clear coat is then added on top of the carbon fiber to protect it against discoloration and give it a nice, smoot surface finish. -
Proprietary 3-inch Filter:
Unitronic’s proprietary 3" dry cotton filter is engineered to maximize air flow with its radius base while keeping dust and foreign debris away from your engine. -
Oversized Airbox Air Inlet for Increased Airflow:
Airflow capacity is increased when combined with Unitronic’s Carbon Fiber Air Duct. -
Smooth Flow Transition:
Ferrule provision on air filter base to ensure a smooth and linear airflow transition between elements. -
Direct Bolt-On Fitment with OEM Mounting Locations:
Utilizes all OEM mounting locations through use of Unitronic’s proprietary EPDM rubber mounting grommets. -
Enhanced Turbocharger Sound:
Unitronic’s Cold Air Intake Systems feature an open element design which results in a more audible sound from your vehicle’s turbocharger and Diverter Valve (DV). -
Dual Air Inlet:
Take advantage of both air inlets available in the OEM grille and benefit from an increased air flow. -
Airbox Water Drainage Provision:
Open slots located at the bottom of airbox allow for the drainage of water.
Hardware Included
- Carbon Fiber Box
- Carbon Fiber Air Duct
- 3-inch Powdercoated Aluminum Inner Intake Tube
- Multi-ply Turbo Inlet Tube
- Proprietary 3-inch Dry-Filter (Cotton)
- Hardware Kit
Recommended Software
- Stage 1
- Stage 1+
- Stage 2 (If equipped with Unitronic's 3'' Downpipe)
Related Hardware
- Carbon Fiber Intake For MK7 GTI | MK7 R | 8V A3 | 8V S3 | MK3 TT
- Unitronic Carbon Fiber Air Duct for MK7/8 & 8V/8Y
Install
The Unitronic Carbon Fiber Cold Air Intake System for vehicles equipped with the 1.8/2.0 TSI Gen3 (MQB) is designed to be simple to install with all the hardware necessary included. Installation time will take approximately one hour including the removal of the factory intake and installation of your new intake system.
A difficulty rating of 1 means that minimal tools and experience are required and those with a basic understanding of the vehicle should have no problem completing the installation.
Unitronic products are designed to meet all manufacturer tolerances and specification with regard to installation ease and tolerances. All of our products are developed to the highest standard of fitment and finish to ensure that it lasts the life of your vehicle.
A difficulty rating of 1 means that minimal tools and experience are required and those with a basic understanding of the vehicle should have no problem completing the installation.
Unitronic products are designed to meet all manufacturer tolerances and specification with regard to installation ease and tolerances. All of our products are developed to the highest standard of fitment and finish to ensure that it lasts the life of your vehicle.
