Diode Dynamics LED Resistor Kit (Set of 4) - Universal Fitment
When you replace incandescant turn signal bulbs with LEDs in most vehicles, the vehicle will start hyperblinking because the LED uses much less power, and the vehicle thinks the bulb is out. You can use these resistors to fix the problem of hyperblinking when you convert to LED bulbs.
Diode Dynamics resistors have extra-long 8" leads for easier installation, and have a rating of 50w, 6ohm. This is usually enough to compensate for one bulb. If you are installing four LED turn signals (front and rear) we recommend four total resistors.
Included with your order:
- 4 resistors
- 8 quick-splice "scotch-lock" connectors
Specifications
Installation
Connect one side of the resistor to the positive turn signal wire, and the other side to negative (ground) with included connectors.
NOTE: Resistors will be hot to the touch when the turn signal is activated for a prolonged period of time. This is normal operation. We recommend mounting the resistors away from any plastic, wires, or fabric.
Installation Time: 20-30 minutes
Tools Needed: Basic Toolset
Modification: Basic Wiring Only
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Diode Dynamics LED Resistor Kit (Set of 4) - Universal Fitment
Diode Dynamics LED Resistor Kit (Set of 4) - Universal Fitment
When you replace incandescant turn signal bulbs with LEDs in most vehicles, the vehicle will start hyperblinking because the LED uses much less power, and the vehicle thinks the bulb is out. You can use these resistors to fix the problem of hyperblinking when you convert to LED bulbs.
Diode Dynamics resistors have extra-long 8" leads for easier installation, and have a rating of 50w, 6ohm. This is usually enough to compensate for one bulb. If you are installing four LED turn signals (front and rear) we recommend four total resistors.
Included with your order:
- 4 resistors
- 8 quick-splice "scotch-lock" connectors
Specifications
Installation
Connect one side of the resistor to the positive turn signal wire, and the other side to negative (ground) with included connectors.
NOTE: Resistors will be hot to the touch when the turn signal is activated for a prolonged period of time. This is normal operation. We recommend mounting the resistors away from any plastic, wires, or fabric.
Installation Time: 20-30 minutes
Tools Needed: Basic Toolset
Modification: Basic Wiring Only
Original: $39.95
-65%$39.95
$13.98Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
When you replace incandescant turn signal bulbs with LEDs in most vehicles, the vehicle will start hyperblinking because the LED uses much less power, and the vehicle thinks the bulb is out. You can use these resistors to fix the problem of hyperblinking when you convert to LED bulbs.
Diode Dynamics resistors have extra-long 8" leads for easier installation, and have a rating of 50w, 6ohm. This is usually enough to compensate for one bulb. If you are installing four LED turn signals (front and rear) we recommend four total resistors.
Included with your order:
- 4 resistors
- 8 quick-splice "scotch-lock" connectors
Specifications
Installation
Connect one side of the resistor to the positive turn signal wire, and the other side to negative (ground) with included connectors.
NOTE: Resistors will be hot to the touch when the turn signal is activated for a prolonged period of time. This is normal operation. We recommend mounting the resistors away from any plastic, wires, or fabric.
Installation Time: 20-30 minutes
Tools Needed: Basic Toolset
Modification: Basic Wiring Only
