Unitronic Carbon Fiber Intake System - Volkswagen Tiguan (MK2) 2.0 TSI 2018-2024
With extensive background in engineering the finest in Performance Software Unitronic developed an intake system that maximizes performance on the Tiguan MK2 equipped with the 2.0 TSI Gen3B engine.
This translates into a complete Cold Air Intake System that is sure to perform to the maximum providing increased air velocity and throttle response while also decreasing air intake temperatures and turbo lag.
In addition Unitronic's Cold Air Intake will enhance the sound of your turbocharger and diverter valve.
Features / Benefits
-
Optimized Design for Maximum Performance:
Unitronic specifically developed its air intake system to provide increased air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag. -
2/2 Twill Prepreg Carbon Fiber Weave:
High quality material to give you a lightweight, durable and resistant airbox. -
Stainless Steel Hardware:
Rust resistant hardware that will outlast your vehicle. -
Quality Silicone Components:
Multi ply silicone turbo inlet hose is strong enough to avoid collapsing when the engine is under hard acceleration. -
Autoclave Construction:
The curing process is completed in an autoclave to eliminate resin voids thus ensuring a strong component. A UV and heat resistant clear coat is then added on top of the carbon fiber to protect it against discoloration and give it a nice, smooth surface finish. -
Oversized Airbox Air Inlet for Increased Airflow:
Airflow capacity is increased when combined with Unitronic’s Carbon Fiber Air Duct. -
Enhanced Turbocharger Sound:
Unitronic’s Cold Air Intake Systems feature an open element design which results in a more audible sound from your vehicle’s turbocharger and Diverter Valve (DV). -
Airbox Water Drainage Provision:
Open slots located at the bottom of airbox allow for the drainage of water. -
Proprietary 3-inch Filter:
Unitronic’s proprietary 3’’ dry cotton filter is engineered to maximize air flow with its radius base while keeping dust and foreign debris away from your engine. -
Smooth Flow Transition:
Ferrule provision on air filter base to ensure a smooth and linear airflow transition between elements. -
Direct Bolt-On Fitment with OEM Mounting Locations:
Utilizes all OEM mounting locations through use of Unitronic’s proprietary EPDM rubber mounting grommets.
Hardware Included
- 3-inch Powdercoated Aluminum Inner Intake Tube
- Multi-ply Turbo Inlet Tube
- Carbon Fiber Box
- Proprietary 3-inch Dry-Filter (Cotton)
- Hardware Kit
Recommended Software
- Stage 1
- Stage 1+
Install
The Unitronic Carbon Fiber Intake System for the Tiguan MK2 equipped with the 2.0 TSI Gen3B engine is designed to be simple to install with all necessary hardware included. Installation time will take approximately one hour including the removal of the factory intake and installation of your new intake system.
A difficulty rating of 1 means that minimal tools and experience are required and those with a basic understanding of the vehicle should have no problem completing the installation.
Unitronic products are designed to meet manufacturer tolerances and specifications with regard to installation ease. All of our products are developed to the highest fitment and finish standard to ensure they last the life of your vehicle.
A difficulty rating of 1 means that minimal tools and experience are required and those with a basic understanding of the vehicle should have no problem completing the installation.
Unitronic products are designed to meet manufacturer tolerances and specifications with regard to installation ease. All of our products are developed to the highest fitment and finish standard to ensure they last the life of your vehicle.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Unitronic Carbon Fiber Intake System - Volkswagen Tiguan (MK2) 2.0 TSI 2018-2024
Unitronic Carbon Fiber Intake System - Volkswagen Tiguan (MK2) 2.0 TSI 2018-2024
With extensive background in engineering the finest in Performance Software Unitronic developed an intake system that maximizes performance on the Tiguan MK2 equipped with the 2.0 TSI Gen3B engine.
This translates into a complete Cold Air Intake System that is sure to perform to the maximum providing increased air velocity and throttle response while also decreasing air intake temperatures and turbo lag.
In addition Unitronic's Cold Air Intake will enhance the sound of your turbocharger and diverter valve.
Features / Benefits
-
Optimized Design for Maximum Performance:
Unitronic specifically developed its air intake system to provide increased air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag. -
2/2 Twill Prepreg Carbon Fiber Weave:
High quality material to give you a lightweight, durable and resistant airbox. -
Stainless Steel Hardware:
Rust resistant hardware that will outlast your vehicle. -
Quality Silicone Components:
Multi ply silicone turbo inlet hose is strong enough to avoid collapsing when the engine is under hard acceleration. -
Autoclave Construction:
The curing process is completed in an autoclave to eliminate resin voids thus ensuring a strong component. A UV and heat resistant clear coat is then added on top of the carbon fiber to protect it against discoloration and give it a nice, smooth surface finish. -
Oversized Airbox Air Inlet for Increased Airflow:
Airflow capacity is increased when combined with Unitronic’s Carbon Fiber Air Duct. -
Enhanced Turbocharger Sound:
Unitronic’s Cold Air Intake Systems feature an open element design which results in a more audible sound from your vehicle’s turbocharger and Diverter Valve (DV). -
Airbox Water Drainage Provision:
Open slots located at the bottom of airbox allow for the drainage of water. -
Proprietary 3-inch Filter:
Unitronic’s proprietary 3’’ dry cotton filter is engineered to maximize air flow with its radius base while keeping dust and foreign debris away from your engine. -
Smooth Flow Transition:
Ferrule provision on air filter base to ensure a smooth and linear airflow transition between elements. -
Direct Bolt-On Fitment with OEM Mounting Locations:
Utilizes all OEM mounting locations through use of Unitronic’s proprietary EPDM rubber mounting grommets.
Hardware Included
- 3-inch Powdercoated Aluminum Inner Intake Tube
- Multi-ply Turbo Inlet Tube
- Carbon Fiber Box
- Proprietary 3-inch Dry-Filter (Cotton)
- Hardware Kit
Recommended Software
- Stage 1
- Stage 1+
Install
The Unitronic Carbon Fiber Intake System for the Tiguan MK2 equipped with the 2.0 TSI Gen3B engine is designed to be simple to install with all necessary hardware included. Installation time will take approximately one hour including the removal of the factory intake and installation of your new intake system.
A difficulty rating of 1 means that minimal tools and experience are required and those with a basic understanding of the vehicle should have no problem completing the installation.
Unitronic products are designed to meet manufacturer tolerances and specifications with regard to installation ease. All of our products are developed to the highest fitment and finish standard to ensure they last the life of your vehicle.
A difficulty rating of 1 means that minimal tools and experience are required and those with a basic understanding of the vehicle should have no problem completing the installation.
Unitronic products are designed to meet manufacturer tolerances and specifications with regard to installation ease. All of our products are developed to the highest fitment and finish standard to ensure they last the life of your vehicle.
Select Include Turbo Inlet Elbow?
Select Include SAI Adapter and Breather Filter Element?
From $236.60
Original: $675.99
-65%Unitronic Carbon Fiber Intake System - Volkswagen Tiguan (MK2) 2.0 TSI 2018-2024—
$675.99
$236.60Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
With extensive background in engineering the finest in Performance Software Unitronic developed an intake system that maximizes performance on the Tiguan MK2 equipped with the 2.0 TSI Gen3B engine.
This translates into a complete Cold Air Intake System that is sure to perform to the maximum providing increased air velocity and throttle response while also decreasing air intake temperatures and turbo lag.
In addition Unitronic's Cold Air Intake will enhance the sound of your turbocharger and diverter valve.
Features / Benefits
-
Optimized Design for Maximum Performance:
Unitronic specifically developed its air intake system to provide increased air velocity, and throttle response, while also decreasing air intake temperatures and turbo lag. -
2/2 Twill Prepreg Carbon Fiber Weave:
High quality material to give you a lightweight, durable and resistant airbox. -
Stainless Steel Hardware:
Rust resistant hardware that will outlast your vehicle. -
Quality Silicone Components:
Multi ply silicone turbo inlet hose is strong enough to avoid collapsing when the engine is under hard acceleration. -
Autoclave Construction:
The curing process is completed in an autoclave to eliminate resin voids thus ensuring a strong component. A UV and heat resistant clear coat is then added on top of the carbon fiber to protect it against discoloration and give it a nice, smooth surface finish. -
Oversized Airbox Air Inlet for Increased Airflow:
Airflow capacity is increased when combined with Unitronic’s Carbon Fiber Air Duct. -
Enhanced Turbocharger Sound:
Unitronic’s Cold Air Intake Systems feature an open element design which results in a more audible sound from your vehicle’s turbocharger and Diverter Valve (DV). -
Airbox Water Drainage Provision:
Open slots located at the bottom of airbox allow for the drainage of water. -
Proprietary 3-inch Filter:
Unitronic’s proprietary 3’’ dry cotton filter is engineered to maximize air flow with its radius base while keeping dust and foreign debris away from your engine. -
Smooth Flow Transition:
Ferrule provision on air filter base to ensure a smooth and linear airflow transition between elements. -
Direct Bolt-On Fitment with OEM Mounting Locations:
Utilizes all OEM mounting locations through use of Unitronic’s proprietary EPDM rubber mounting grommets.
Hardware Included
- 3-inch Powdercoated Aluminum Inner Intake Tube
- Multi-ply Turbo Inlet Tube
- Carbon Fiber Box
- Proprietary 3-inch Dry-Filter (Cotton)
- Hardware Kit
Recommended Software
- Stage 1
- Stage 1+
Install
The Unitronic Carbon Fiber Intake System for the Tiguan MK2 equipped with the 2.0 TSI Gen3B engine is designed to be simple to install with all necessary hardware included. Installation time will take approximately one hour including the removal of the factory intake and installation of your new intake system.
A difficulty rating of 1 means that minimal tools and experience are required and those with a basic understanding of the vehicle should have no problem completing the installation.
Unitronic products are designed to meet manufacturer tolerances and specifications with regard to installation ease. All of our products are developed to the highest fitment and finish standard to ensure they last the life of your vehicle.
A difficulty rating of 1 means that minimal tools and experience are required and those with a basic understanding of the vehicle should have no problem completing the installation.
Unitronic products are designed to meet manufacturer tolerances and specifications with regard to installation ease. All of our products are developed to the highest fitment and finish standard to ensure they last the life of your vehicle.
